Disassembly Procedures 1-19
7. Remove the mainboard by gently lifting it from the top assembly (Figure 1-22).
Figure 1-22. Mainboard Removal
The touchpad FFC (Flexible Flat Cable), the LED Board FFC and the keyboard
FPC (Flexible Printed Circuit) can be damaged if removed while the
mainboard connectors are locked. Make sure all cables are moved away from
the device to avoid damage during removal.
Figure 1-23. Mainboard
Circuit boards >10 cm² have been highlighted with a yellow rectangle as
shown in Figure 1-23. Remove the circuit board and follow local
regulations for disposal.
WEEE Annex VII Component:
Mainboard
To Next Page
Loading...
