Acer ConceptD 300 - M.2 SSD Module Installation

- UPGRADING YOUR COMPUTER
18
M.2 SSD module
The computer contains one M.2 SSD module installed in the
M.2 PCIE slot.
Removing the M.2 SSD module
1. Perform the Pre-installation instructions on page 2.
2. Remove the graphics board. See Removing the
graphics board on page 14.
3. Remove the screw that secures the M.2 SSD module
from the mainboard.
4. Detach the M.2 SSD module from the mainboard.