Do you have a question about the Acer ConceptD 500 and is the answer not in the manual?
Operating system architecture | 64-bit |
---|---|
Bus type | DMI3 |
Tjunction | 100 °C |
Processor cache | 9 MB |
Processor cores | 6 |
System bus rate | 8 GT/s |
Processor family | Intel® Core™ i5 |
Processor socket | LGA 1151 (Socket H4) |
Processor codename | Coffee Lake |
Processor frequency | 2.9 GHz |
Processor cache type | Smart Cache |
Processor lithography | 14 nm |
Processor manufacturer | Intel |
PCI Express slots version | 3.0 |
Processor boost frequency | 4.1 GHz |
PCI Express configurations | 1x8+2x4, 1x16, 2x8 |
Thermal Design Power (TDP) | 65 W |
Number of processors installed | 1 |
Maximum number of PCI Express lanes | 16 |
Memory types supported by processor | DDR4-SDRAM |
Memory clock speeds supported by processor | 2666 MHz |
Memory bandwidth supported by processor (max) | 41.6 GB/s |
Maximum internal memory supported by processor | 128 GB |
SSD capacity | The Solid State Drive's storage capacity in Gigabytes. |
Storage media | SSD |
Optical drive type | No |
Card reader integrated | Yes |
Total storage capacity | 1000 GB |
Compatible memory cards | SD |
On-board graphics card ID | 0X3E98/x92 |
Discrete graphics card model | NVIDIA® GeForce RTX™ 2060 |
On-board graphics card model | Intel® UHD Graphics 630 |
Discrete graphics card memory | 6 GB |
Discrete graphics memory type | GDDR6 |
On-board graphics card family | Intel® UHD Graphics |
Maximum on-board graphics card memory | 64 GB |
On-board graphics card OpenGL version | 4.5 |
On-board graphics card base frequency | 350 MHz |
On-board graphics card DirectX version | 12.0 |
On-board graphics card dynamic frequency (max) | 1050 MHz |
Number of displays supported (on-board graphics) | 3 |
Internal memory | 16 GB |
Wi-Fi standards | 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac) |
Cabling technology | 10/100/1000Base-T(X) |
Top Wi-Fi standard | Wi-Fi 5 (802.11ac) |
Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
Power supply | 500 W |
HDMI ports quantity | - |
USB 2.0 ports quantity | 4 |
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 2 |
USB 3.2 Gen 1 (3.1 Gen 1) Type-C ports quantity | 0 |
Certification | DMI GS PC2001 BSMI CB CE |
Chassis type | Desktop |
Product color | White |
Placement supported | Vertical |
Product type | Workstation |
Scalability | 1S |
Processor ARK ID | 134898 |
Processor package size | 37.5 x 37.5 mm |
Supported instruction sets | AVX 2.0, SSE4.1, SSE4.2 |
Thermal solution specification | PCG 2015C |
Intel Identity Protection Technology version | 1.00 |
Intel Stable Image Platform Program (SIPP) version | 0.00 |
Depth | 476 mm |
---|---|
Width | 204 mm |
Height | 439 mm |
Weight | 10100 g |
Essential safety and handling guidelines before installing computer components.
List of tools needed for performing component replacement and upgrades.
Steps to take before starting any computer component installation.
Steps to follow immediately after installing a computer component.
Procedure for removing the rear panel of the computer case.
Procedure for reattaching the rear panel of the computer case.
Steps to remove the left side panel of the computer case.
Steps to reattach the left side panel of the computer case.
Steps to remove the right side panel of the computer case.
Steps to reattach the right side panel of the computer case.
Procedure for removing 3.5-inch SATA hard drives from the internal HDD cage.
Procedure for installing new 3.5-inch SATA hard drives into the HDD bracket.
Guidelines for configuring and populating DDR4 U-DIMM memory slots.
Steps for safely removing a memory module from the DIMM slot.
Steps for inserting and securing a new memory module into a DIMM slot.
Procedure for safely removing a graphics card from the PCIe x16 slot.
Procedure for installing a new graphics card into the PCIe x16 slot.
Procedure for removing an M.2 SSD module from the M.2 PCIe slot.
Procedure for installing a new M.2 SSD module into the M.2 PCIe slot.