Acer ConceptD 500 - Removing a Memory Module

- UPGRADING YOUR COMPUTER
16
Removing a memory module
1. Perform Pre-installation instructions on page 6.
2. Disconnect the thermal fan cable from the mainboard.
3. Press outward the holding clips on both sides of the
DIMM slot outward to release the memory module (1).
4. Gently pull the memory module upward to remove it from
the DIMM slot (2).
5. Repeat steps 3~4 to remove the other memory modules.
6. Repeat steps 5~6 to remove the other memory modules.
2
1