Acer CP514-1H - Touchpad Module Removal

1-18 Disassembly Procedures
Touchpad Module Removal 0
Prerequisite:
Battery Pack Removal
1. Disconnect the touchpad FFC from the mainboard connector (A) and the touchpad
connector (B). Then remove the touchpad FFC from the top assembly (Figure 1-21).
Figure 1-21. Touchpad Module Removal
2. Lift the keyboard FPC (C) and gently peel off the conductive tape (D) from the
touchpad module (Figure 1-22).
Figure 1-22. Touchpad Module Removal
A
B
D
C