Disassembly Procedures 1-19
3. Remove three (3) screws securing the touchpad module in place (Figure 1-23).
Figure 1-23. Touchpad Module Removal
4. Using the screwdriver, push the guide pins (E) firmly to release them from the top
assembly (Figure 1-24).
5. With one hand is placed underneath the touchpad module, push the touchpad
module slightly to disengage it from the bottom latches (F), and then remove the
touchpad module (G) from the top assembly (Figure 1-24).
Figure 1-24. Touchpad Module Removal
G
F F
WEEE Annex VII Component: Touchpad Module
E
To Next Page
Loading...
