7
English
Installation
Note: Before making connections, make sure that the power for all the
connected equipment is off.
Follow the steps below to connect the monitor to your host system.
Connecting Your Monitor to a Computer
1. Connect the HDMI cable and/or DP cable to your computer according to your
applications.
Note: Both the HDMI cable and DP cable are optional.
2. Connect the power adapter to the DC-in port on the monitor.
3. Connect the power cord to the power adapter.
4. Fully insert the power cord plug into the power outlet socket.
Note: If you want to move the monitor, hold the left and right sides of the
monitor. Lifting up the monitor by holding its base may damage the monitor.
HDMI1DP1HDMI2 DP2HDMIDP
HDMI1 / HDMI2
DP1 / DP2
To Next Page
Loading...
