How to fix no picture on Acer Monitor with LED on?
If there's no picture on your Acer Monitor and the LED is on, use the On-Screen Display (OSD) to adjust the brightness and contrast to the maximum settings. Alternatively, reset them to their default values.
What to do if there is no picture on Acer ED320Q Monitor and LED flashes?
If there's no picture on your Acer Monitor and the LED is flashing, ensure the video signal cable is securely connected to the back of the monitor and that your computer system is powered on.
Why is there no sound from my Acer ED320Q?
If you experience no sound or very low sound from your Acer Monitor (Audio-Input model), first, check that the audio cable is properly connected between the monitor and the host PC. Also, verify that the volume level on your host PC is not set to the minimum; try increasing it.
What to do if my Acer ED320Q Monitor has no picture and the LED is off?
If there's no picture on your Acer Monitor and the LED is off, verify that the power switch is turned on and that the AC power cord is properly connected to the monitor.
How to fix the display if it is missing or shifted on Acer Monitor?
If the display on your Acer Monitor is missing, shifted, or the image size is incorrect, use the On-Screen Display (OSD) to adjust the RESOLUTION, CLOCK, CLOCK-PHASE, H-POSITION, and V-POSITION settings, especially when using non-standard signals. Also, if the full-screen image is missing, try selecting a different resolution or vertical refresh timing. After adjusting the image size, wait a few seconds before changing the signal cable or powering off the monitor.
General| Screen Size | 31.5 inches |
|---|---|
| Refresh Rate | 75 Hz |
| Panel Type | VA |
| Aspect Ratio | 16:9 |
| Brightness | 250 cd/m² |
| Curvature | 1500R |
| Contrast Ratio | 3000:1 |
| Viewing Angle | 178° (H) / 178° (V) |
| Color Support | 16.7 million colors |
| Color Gamut | 72% NTSC |
| VESA Mount | 100 x 100 mm |
| Tilt | -5° to 15° |
| Resolution | 1920 x 1080 |
| Ports | 1 x HDMI 1.4, 1 x VGA |
Section for users to record model, serial, purchase date, and place for correspondence.
Discusses normal behaviors and characteristics of LCD monitors, like flickering and pixel variations.
General safety guidelines for users to follow when using the monitor.
Provides instructions on how to safely clean the monitor screen and cabinet.
Advice on accessible power outlet placement for ease of use and disconnection.
Recommendations for protecting hearing by managing audio volume levels.
Critical warnings regarding hazards, and guidance on operating with correct power and grounding.
Details on using extension cords, avoiding overloads, and proper grounding of power outlets.
Instructions on when to seek qualified service personnel for repairs or issues.
Specific conditions under which the product should be unplugged and serviced by professionals.
Advice on operating the monitor in areas with potentially explosive atmospheres.
Acer's commitment to environmental protection and recycling of IT equipment.
Guidance on proper disposal of the product as electronic waste for environmental protection.
Explanation of pixel variations and their non-malfunction status.
Information on preventing eyestrain, headaches, and musculoskeletal disorders from computer use.
Advice on adjusting monitor viewing angle and posture for maximum comfort.
Suggestions to reduce eyestrain from long viewing hours, including eye breaks and display adjustments.
Tips for creating relaxing and productive computer usage habits, including breaks and exercises.
Important safety measures to prevent damage and ensure safe operation of the monitor.
Detailed instructions for safely cleaning the monitor, including what not to use.
Explanation of the monitor's power saving modes and LED indicators.
Information on DDC protocol for Plug and Play functionality and automatic configuration.
Comprehensive guide to adjusting picture parameters like brightness, contrast, blue light, and black boost.
In-depth explanation of color settings including Gamma, Color Temperature, sRGB, and 6-axis adjustments.
Instructions for adjusting audio volume and mute controls.
Details on configuring Over Drive, FreeSync, VRB, and Aim Point for gaming performance.
Lists common problems and their remedies when using HDMI or DP connections.
Lists common problems and remedies for VGA connections, including picture and sound issues.
Official declaration of the product's conformity with EU directives and harmonized standards.
FCC declaration confirming the product's compliance with US regulations.
To Next Page
