iii
Special notes on LCD monitors
The following are normal with the LCD monitor and do not indicate a
problem.
• Due to the nature of the uorescent light, the screen may icker during
initial use. Turn o the power switch and then turn it on again to make
sure the icker disappears.
• You may nd slightly uneven brightness on the screen depending on
the desktop pattern you use.
• The LCD screen has 99.99% or more eective pixels. It may include
blemishes of 0.01% or less such as a missing pixel or a pixel lit all the
time.
• Due to the nature of the LCD screen, an afterimage of the previous
screen may remain after switching the image, when the same image
is displayed for hours. In this case, the screen is recovered slowly by
changing the image or turning o the power switch for a few hours.
• Acer monitor is purposed for video and visual display of information
obtained from electronic devices.
Information for your safety and comfort
Safety instructions
Read these instructions carefully. Keep this document for future reference.
Follow all warnings and instructions marked on the product.
Cleaning your monitor
Please carefully follow these guidelines when cleaning the monitor:
• Always unplug the monitor before cleaning.
• Use a soft cloth to wipe the screen and cabinet front and sides.
Connecting/disconnecting the device
Observe the following guidelines when connecting and disconnecting power
from the LCD monitor:
• Make sure the monitor is attached to its base before connecting the
power cord to the AC power outlet.
• Make sure both the LCD monitor and the computer are turned o before
connecting any cable or unplugging the power cord.
• If the system has multiple sources of power, disconnect power from the
system by unplugging all power cords from the power supplies.
To Next Page
Loading...
Need help?
General
