Acer Acer –LCD-G195W
11
b. Show “source icon” at the same time, as searching that port
c. Go into next port automatically, if search the port without signal
d. Display it, if search the port with signal
D. When the volume menu displays, press [►] to increase the volume.
[e Color ]
A. When function menu displays, press [e Color] to show “e Color OSD”, and press
again the OSD can not disappear, but the time of “e Color OSD ”disappearing is reset
to 10 seconds again.
B. When OSD disappear not including “e Color OSD”, press [e Color] to show “e Color
OSD” OSD, the OSD before disappears, but the parameters of it should be saved
[POWER] Power on or power off the monitor
6.1.2Hot Key Operation
HOT KEY OPERATION
FUNCTION
e Color AUTO MENU
◄ ►
POWER
DESCRIPTION
FACTORY
MODE
●
ON
Press [
e
], and then press [POWER] for DC
power on. OSD menu will be shown with
“
F
”
on
the left top. Select
“
F
”
for entering factory mode.
OSD Structure
The On-Screen Display (OSD) shall be an easy to use icon based menu through keypad OSD buttons or remote control
unit. The unit shall leave the factory with all OSD controls set to their default values.
First Second Third Fourth
Control
Range
Default Value
e-color
empowering
technology
--- --- ---
Auto --- --- --- ---
Main menu Main menu (Pictiure) --- --- ---
Audio Audio menu --- --- ---
Function
Menu
Input --- --- --- ---
Acer eColor Management
empowering
technology
--- --- Standard
User mode
77
Text mode 44
Standard mode 77
Graphics mode
97
Brightness --- ---
0～100
Movie mode
77
User mode
50
Text mode
50
Standard mode
50
Graphics mode
60
Contrast --- ---
0～100
Movie mode
56
Picture
H.Position
--- ---
0～100
50
To Next Page
Loading...
