Acer H223HQ User Manual

7
English
Installation
To install the monitor on your host system, please follow the steps below:
Steps
1 Connect the video cable
a Make sure both the monitor and computer are switched off.
b Connect the VGA video cable to the computer.
c Connect the digital cable (only for dual-input models).
(1) Make sure both the monitor and computer are switched off.
(2) Connect one end of the 24-pin DVI* cable to the back of the
monitor and the other end to the computer's port.
(3) Connect one end of the 19-pin HDMI* cable to the back of the
monitor and the other end to the computer's port.
2 Connect the power cord
Connect the power cord to the monitor, then to a properly grounded AC
outlet.
3 Turn on the monitor and computer
Turn on the monitor first, then the computer. This sequence is very
important.
4 If the monitor does not function properly, please refer to the
troubleshooting section to diagnose the problem
* for selected models

Acer H223HQ Specifications

General

Pixel pitch	0.248 x 0.248 mm
Aspect ratio	16:9
Response time	2 ms
Display diagonal	21.5 \
Contrast ratio (dynamic)	20000:1
Contrast ratio (typical)	250:1
Viewing angle, horizontal	170 °
Display brightness (typical)	300 cd/m²
Power management	ENERGY STAR
Display viewable area (HxV)	476.6 x 268.1 mm
Mean time between failures (MTBF)	50000 h
HDCP	Yes
RMS rated power	2 W
Certification	CE, TÜV GS, MPRII, ISO 13406-2
Product color	Black
Market positioning	-
LED indicators	Stand-by
Panel mounting interface	100 x 100 mm
Power consumption (off)	0.9 W
Power consumption (standby)	1.2 W
Power consumption (typical)	29.8 W

Weight and Dimensions

Depth (without stand)	69.8 mm
Width (without stand)	519.6 mm
Height (without stand)	376.9 mm
Weight (without stand)	4900 g