Diagnostic Utilities 2-2
Diagnostic Utilities
Introduction
The ICONIA TAB A200 has a software tool designed to diagnose problems with its hardware
components.
Diagnostic Tool SOP
Preparation
• Diagnostic Tool - ACTP.zip
• USB Driver of A200 for PC
• USB cable
• MicroSD card
Tool Installation
1. Install the USB driver in PC/NB.
2. Connect the device to the PC/NB using a USB cable.
3. Enable USB debugging in the device (Settings → Applications → USB debugging).
Figure 2:1. USB Debugging Mode
4. On the PC/NB, unzip “ACTP.zip”.
To Next Page
Loading...
