Service and Maintenance 3-28
3. Disconnect the speakers connector from the mainboard connector (A).
Figure 3:42. Disconnecting the Speakers and Touch Module Cables
4. Disconnect the touch module cable (B) and release the speakers cable from the guides.
(Figure 3:41)
CAUTION:
The touch module cable may be damaged when folded. Do not fold the touch module cable.
5. Remove the screws (C, D) from the bezel.
Figure 3:43. Removing the Speakers
6. Remove the speakers (E) from the bezel. (Figure 3:43)
To Next Page
Loading...
