1 Getting started
Preparing to use your Acer n300
9
Connecting the Cradle
1 Connect the AC adapter cord to the DC-in jack at the back of the cradle.
2 Plug the AC adapter into any AC current outlet and charge the device for at least 4
hours.
Power LED status during charging:
• Charging - LED indicator flashes green
• Charging complete - LED indicator steady green
If the battery level becomes low in the course of normal use, a status icon appears on
the handheld screen indicating low or critical low battery status. Perform an
ActiveSync
®
operation to back up your data; then recharge the battery.
To Next Page
Loading...
