What to do if Acer Nitro XV272 Monitor has no picture and LED is off?
If your Acer Monitor shows no picture and the LED is off, verify that the power switch is turned on and that the AC power cord is properly connected to the monitor.
What to do if my Acer Monitor LED displays amber color?
If your Acer Monitor's LED displays an amber color, make sure the video signal cable is properly connected to the back of the monitor and that your computer system is powered on.
How to fix no picture on Acer Nitro XV272 with LED on?
If your Acer Monitor displays no picture but the LED is on, you can try adjusting the brightness and contrast in the OSD menu to the maximum level. Alternatively, reset the brightness and contrast to their default settings.
Why is my Acer Monitor making abnormal sounds?
If your Acer Monitor (Audio-Input model) is making abnormal sounds, check that the audio cable is connected to the host PC. Also, verify that the volume on the host PC isn't set to the minimum and try increasing it.
General| Color | black |
|---|---|
| Screen Type | led |
| Tiltable | yes |
| Wall Mount | 100mm x 100mm |
| OS Compatibility | mac, windows |
| Screen Size | 27 inches |
| Panel Type | ips |
| Aspect Ratio | 16:9 |
| Resolution | 1920 x 1080 |
| Native Resolution | 1920 x 1080 |
| Refresh Rate | 144hz |
| Horizontal Viewing Angle | 178 degrees |
| Vertical Viewing Angle | 178 degrees |
| Response Time | 1 milliseconds |
| Brightness | 400 candela per square meter |
| Contrast Ratio | 100, 000, 000:1 |
| Synchronization | freesync (amd adaptive sync) |
| Power Consumption | 23 watts |
| Width with Stand | 24.2 inches |
| Depth without Stand | 9.2 inches |
| Height without Stand | 20.5 inches |
| Net Weight without Stand | 14.4 pounds |
To Next Page