31
English
Phase:
Synchronize the signal timing of the display with the graphic card. If the
image appears to be unstable or flickers, use the Phase to correct it. This is a fine
adjustment.
Note: The Phase can be adjusted only in VGA mode.
3D
3D
3D Format
3D Sync. Invert
3D
Select Exit Enter
Off
Auto
Off
3D:
Turn the 3D function on or off.
3D Format:
Set up the 3D format according to the 3D input signal. Options are:
Auto
,
Frame Packing
,
Side by Side Half
,
Side by Side Full
,
Top and Bottom
, and
Frame Sequential
.
3D Sync. Invert:
Turn the 3D sync. inverter option on or off.
Note:
- 3D/3D Sync. Invert cannot be changed when you select image settings.
- In 3D mode, the maximum supported input timing is 1024 x 768 @ 120Hz.
To Next Page
Loading...
