30
English
Image
Projection
Aspect Ratio
Zoom
Sharpness
H. Position
V. Position
Frequency
Phase
Image
Select Exit Enter
Auto
Projection:
Select the projection mode, depending upon how the projector is
mounted.
y
Auto Keystone
: On
Direct projection
Rear projection
y
Auto Keystone
: Off
Direct projection
Rear projection
Ceiling mount projection
Ceiling mount rear projection
Aspect Ratio:
Adjust the aspect ratio to match the video source. Options are:
y
Auto
: Automatically selects the appropriate display format.
y
16:9
: The input source scales to fit the screen and projects a 16:9 image.
y
4:3
: The input source scales to fit the screen and projects a 4:3 image.
Zoom:
Zoom in or out of the image.
Sharpness:
Adjust the sharpness of the image.
H. Position:
Shift the projected image position horizontally.
V. Position:
Shift the projected image position vertically.
Frequency:
Change the display data clock frequency to match the frequency of your
computer’s graphics card. If you see a vertical flickering wave, use the Frequency
control to minimize the bars. This is a coarse adjustment.
Note: The Frequency can be adjusted only in VGA mode.
To Next Page
Loading...
