Acer TMB311-31 - Removing the USB board

Removing the USB board
1. Remove 2 screws on the IO board.
Figure 3-19. USB board
Table 3-7. USB board screw
Step
Screw
Quantity
Screw Type
Torque/kgfcm
Remove
USB board
SCREW_M2*3 mm_0.65
mm_5 mm_BLACK
1
1.5+/-0.1
kgf.cm
2. Remove the IO FFC from the USB board.
Figure 3-20. USB board
UB : WEEE Annex VII component