Acer TMB311-31 - Removing the RJ45 board

Removing the RJ45 board
1. Remove 2 screws on the RJ45 board.
Figure 3-21. RJ45 board
Table 3-8. RJ45 board screw
Step
Screw
Quantity
Screw Type
Torque/kgfcm
Remove
RJ45 board
SCREW_M2*3mm_0.6
5 mm_5 mm_BLACK
2
1.5+/-0.1
kgf.cm
2. Remove the FFC from the RJ45 board.
Figure 3-22. RJ45 board
1
2
RJ45 Board : WEEE Annex VII component