What to do if touchpad doesn’t work on Acer TravelMate 4060 Laptop?
If the touchpad on your Acer Laptop is not working, try the following: * Reconnect the touchpad cables. * Replace the touchpad. * Replace the system board.
What to do if tests detect a keyboard problem on Acer TravelMate 4060 Laptop?
If tests indicate a problem with the keyboard on your Acer Laptop, you can try: * Reconnecting the keyboard cables. * Replacing the keyboard. * Replacing the main board.
What to do if memory errors stop Acer Laptop?
If memory errors occur that halt system operations, display error messages, or freeze the system, boot from the diagnostics diskette and initiate the diagnostics program. Navigate to the diagnostic memory within the test items, press F2, and adhere to the instructions provided in the message window.
What to do if the voltage is not correct when checking the power adapter of Acer TravelMate 4060?
If the voltage is incorrect when checking the power adapter of your Acer Laptop, replace the power adapter.
What to do if the charge indicator still does not light up after checking the battery of Acer TravelMate 4060?
If the charge indicator on your Acer Laptop remains off after checking the battery, consider replacing the battery pack or the DC/DC charger board.
What to do if the voltage is still less than 7.5 Vdc after recharging Acer TravelMate 4060 battery?
If the voltage remains below 7.5 Vdc after recharging the battery pack on your Acer Laptop, replace the battery.
Why does the pointer drifts on the screen for a short time after using the touchpad of Acer TravelMate 4060?
If the pointer drifts briefly on the screen after touchpad use on your Acer Laptop, it's not a hardware issue. No service is needed if it stops shortly.
What to do if Acer TravelMate 4060 system configuration does not match installed devices?
If the system configuration of your Acer Laptop does not match the installed devices, enter the BIOS Setup Utility to execute “Load Default Settings”, then reboot the system. Also, reconnect hard disk/CD-ROM/diskette drives.
What to do if the error still remains after reconnecting the internal diskette drive of Acer Laptop?
If the error persists on your Acer Laptop after reconnecting the internal diskette drive, try reconnecting the external diskette drive/DVD-ROM module. If that doesn't work, replace the external diskette drive/CD-ROM module, or replace the main board.
What to do if the voltage is within the range when checking the power adapter of Acer Laptop?
If the voltage is within the correct range when checking the power adapter of your Acer Laptop, replace the System board.
Explanation of the Acer eManager software and its functions.
Troubleshooting power button not starting or booting the computer.
Resolving issues where nothing appears on the screen.
Information to prepare before contacting Acer support.
Setting and using Supervisor, User, and Password on Boot.
Setting the computer's boot order in the BIOS.
Enabling the disk-to-disk recovery feature in BIOS.
Steps to create system backup images to HDD, CD, or DVD.
Procedure to restore the system from a previous backup.
Creating a CD with the factory default system image.
General advice for troubleshooting computer issues.
Table of common error messages and their corrective actions.
To Next Page
General