2 Customizing your computer50
3 Insert the memory module diagonally into the slot (a), then gently
press it down (b) until it clicks into place.
4 Replace the memory cover and secure it with the screw.
The computer automatically detects and reconfigures the total
memory size.
Notebook Manager
The computer has a built-in system setup program called Notebook
Manager. The Windows-based Notebook Manager allows you to set
passwords, the startup sequence of the drives, power management
and other settings. It also shows current hardware configurations.
To start the Notebook Manager, press Fn-F2 or follow these steps:
1 Click on Start, All Programs, then Acer.
2 Select the Notebook Manager application to run the program.
Please click on Help for online help information.
TMC110-en.book Page 50 Friday, March 21, 2003 2:02 PM
To Next Page
Loading...
