- 27 -
Chapter 2
Operating Instructions
CONTROLS
Control panel (monitor front panel)
1
Power LED, will be blue when monitor is on; be amber when in power
saving mode.
2
Power ON/OFF switch, push to ON and push to OFF. (toggle switch)
3
Function change or Adjust increase.
4
Function change or Adjust decrease.
5
Menu
Function select
6
Auto
Auto adjust or Exit OSD menu.
7
e
eColor management function
Note:
1. Press button 4 (plus +) or (minus -) at the same time can activate “Volume Adjustment”.
2. When OSD Menu is off, press button 5 (auto) at the same time can activate “Auto Adjustment” immediately.
3. When into Factory mode press 4 (plus +),(minus -) and 1 (power) together 2 seconds at same time.
To Next Page
Loading...
