BIOS utility - 83
BIOS UTILITY
The BIOS utility is a hardware configuration program built into your
computer's BIOS.
Your computer is already properly configured and optimized, and you do
not need to run this utility. However, if you encounter configuration
problems, you may need to run it.
To activate the BIOS utility, turn your computer off, then press and hold the
volume down
key before pressing the power button.
Boot sequence
To set the boot sequence in the BIOS utility, activate the BIOS utility, then
select Boot from the categories listed at the top of the screen.
Setting passwords
To set a password on boot, activate the BIOS utility, then select Security.
Set a supervisor password, then enable Password on boot.
not need to run this utility. However, if you encounter configuration
www.devicemanuals.eu
not need to run this utility. However, if you encounter configuration
our computer off, t
www.devicemanuals.eu
our computer off, t
hen press and hold the
www.devicemanuals.eu
hen press and hold the
key before pressing the power button.
www.devicemanuals.eu
key before pressing the power button.
To set the boot sequence in the BIOS utility, activate the BIOS utility, then
www.devicemanuals.eu
To set the boot sequence in the BIOS utility, activate the BIOS utility, then
from the categories listed at the top of the screen.
www.devicemanuals.eu
from the categories listed at the top of the screen.
Setting passwords
www.devicemanuals.eu
Setting passwords
To set a password on boot, activate the BIOS utility, then select
www.devicemanuals.eu
To set a password on boot, activate the BIOS utility, then select
Set a supervisor password, then enable
www.devicemanuals.eu
Set a supervisor password, then enable
To Next Page
Loading...
