Acer XD1150 - Page 29

17
Confi dential
1
2
No Procedure Photo
1. Assemble the DMD Board
Components.
2. Screw 4 big hex screws to
assemble the DMD Board.
3. Screw 4 screws and put on
1 EMI tape to assemble the
Heat Sink.
4 Screw 1 screw to assemble
the Photo Sensor Board.
5 1. Screw 1 screw to assemble
the Light Cut.
2. Screw 1 screw to assemble
the Thermal Sensor.
6 Assemble 3 screws to
assemble the Engine Module.