Acer XD1150 - Firmware Upgrade Procedure

Confidential 6
Firmware Upgrade Procedure
No Step Procedure Photo
1 Set-up 1. Plug in USB Cable into
the Projector.
2. Hold on "Menu" button
and then plug in Power
Cord.
3. Wait for about 5
seconds.
(Note: The system fan will
not function. The light will
not function as well.)
2 Set-up Link PC COM1 and
projector
3 Execute the "DLP
Compose
TM"
file.
.
4 Click "Edit" and
"Preferences".
5 1. Click "Library".
2. The library path located
in the default installation
directory is:
C:\Program Files\DLP
Composer.
If not, press "Browse" to
select the right path.
6 1. Select
"Edit\Preferences\
Communications" and
choose "USB".
2. Click "OK".
1
2
1
2
USB
OK
Vendor: 0x451
Product: 0x2000