Confi dential 16
No Procedure Photo
1 1. Screw 2 screws to
assemble the Zoom Ring &
Stopper.
2. Screw 3 screws to
assemble the Focus Ring.
2 Screw 1 screw to assemble
the Color Wheel.
3 When reassembling the DMD
Module, please be aware of
the following Notes.
Note1:
The DMD Heat Sink Spring
Plate should be placed as the
picture shows.
Note 2:
The DMD Insulator Mylar
& DMD Heat Sink Backer
Plate should be placed as the
picture shows.
Note 3:
The DMD Chip should be
reassembled as the picture
shows.
2. Assemble Engine Module
Zoom Ring
Zoom Ring Stopper
To Next Page
Loading...
