Acer XD1150 - Page 38

Confi dential 26
11. Assemble Top Cover / IO Cover
No Procedure Photo
1 1. Put on 1 FPC Cable to
assemble the Top Cover.
2. Push the Bottom Cover
fi rst; then, push down the Top
Cover to assemble the Top
Cover.
2 Screw 2 screws & 6 hex
screws to assemble the IO
Cover.
Unscrew 2 screws & 2 hex
screws to remove the IO
Cover.
(Note: Only for XD1150/
XD1250)
XD1150/XD1250