Acer XL2330W - Remote Setup

English
20
SETUP AND INSTALLATION
Remote setup
Installing / replacing the batteries
1. Press rmly and slide the battery cover o󰀨.
M
n
O
2
-
L
i
C
E
L
L
3
V
O
L
T
S
J
A
P
A
N
H
CR2025
2. Install new battery into the compartment. Remove the old
battery and install new one (CR2025). Ensure that the side
with a “+” is facing up.
3
V
O
L
T
S
CR2025
3. Put the cover back.
M
3
V
O
L
T
S
CR2025
Note: Replace only with the same or equivalent type batteries.
CAUTION
To ensure safe operation, please observe the following precautions:
 Use CR2025 type battery.
 Avoid contact with water or liquid.
 Do not expose the remote control to moisture or heat.
 Do not drop the remote control.
 If the battery has leaked in the remote control, carefully wipe the case clean and install new battery.
 Risk of an explosion if battery is replaced by an incorrect type.
 Dispose of used battery according to the instructions.