Acer XL2330W - Navigating the OSD Menu

English
24
USING THE PROJECTOR
Menu navigation and features
The projector has multilingual on-screen display menus that allow you to make image adjustments and change a
variety of settings. The projector will automatically detect the source.
1. To open the OSD menu, press the Menu button on the remote control or keypad.
2. When OSD is displayed, use pq keys to select any item in the main menu. While making a selection
on a particular page, press the Enter button on the projector keypad or the remote control to enter sub
menu.
3. Use tu keys to select the desired item in the sub menu and then press the Enter button to view
further settings. Adjust the settings by using tu keys.
4. Select the next item to be adjusted in the sub menu and adjust as described above.
5. Press press the Enter button to conrm, and the screen will return to the main menu.
6. To exit, press the Menu button again. The OSD menu will close and the projector will automatically
save the new settings.
Sub Menu
Main Menu
Settings
Navigation guide
Image Settings
3D
Aspect Ratio
Zoom
Keystone
Display
Select Exit
Enter