Acer XL2330W - Page 30

English
30
USING THE PROJECTOR
 If the Display Mode setting is set to DICOM SIM., user can only select DICOM SIM. for Gamma
setting.
 If the Display Mode setting is set to HDR SIM. or HLG SIM., user can only select HDR SIM. or HLG
SIM. for Gamma setting.
Color Settings
Congure the color settings.
 BrilliantColor
TM
: This adjustable item utilizes a new color-processing algorithm and enhancements to
enable higher brightness while providing true, more vibrant colors in picture.
 Color Temperature: Select a color temperature from Warm, Standard, or Cold.
 Color Matching: Select the following options:
– Color: Adjust the red, green, black, cyan, yellow, magenta, and white level of the image.
– Hue / R(red)*: Adjust the color balance of red and green.
Note: *If the Color setting is set to White, you can adjust the red color setting.
– Saturation / G(green)*: Adjust a video image from black and white to fully saturated color.
Note: *If the Color setting is set to White, you can adjust the green color setting.
– Gain / B(blue)*: Adjust the image brightness.
Note: *If the Color setting is set to White, you can adjust the blue color setting.
– Reset: Return the factory default settings for color matching.
– Exit: Exit the “Color Matching” menu.
 Color Space (non-HDMI input only): Select an appropriate color matrix type from the following: Auto,
RGB, or YUV.
 Color Space (HDMI input only): select an appropriate color matrix type from the following: Auto,
RGB(0-255), RGB(16-235), and YUV.
Brightness Mode
Adjust the brightness mode settings.
 DynamicBlack: Use to automatically adjust the picture brightness in order to give optimum contrast
performance.
 Eco.: Choose “Eco.” to dim the projector light source which will lower power consumption and extend
the light source life.
 Power: Choose the power percentage for brightness mode.
Reset
Return the factory default settings for color settings.