DAILY CHECKS
In order to avoid damage, it is important to
check the condition of the excavator before
starting.
CAUTION
To avoid personal injury:
Do maintenance work on the
excavator only on even ground
with the engine off and the
safety devices in the “Lock”
position.
TILTING THE SEAT
CAUTION
To avoid personal injury:
Lock the lever for attachment
control when tilting the seat.
To tilt the seat forward, pull the seat tilting
lock lever and tilt the seat forward.
Checks
Walk around the excavator and check for
visual damage and wear.
Check coolant level. (See regular checkpoints
in “MAINTENANCE”.)
Check fuel level.
Check engine oil level.
Check hydraulic fluid level.
Check air filter for clogging.
Check all control lamps, indicators, engine
rpm's counter and hour meter.
Check the light system.
Check the seat belt and the Rops/Tops safety
device.
Check the condition of the danger, warning
and caution labels. (See "DANGER,
WARNING AND CAUTION LABELS" in "SAFE
OPERATION" .)
(1)
Seat tilting lock lever (A) “Tilting forward”
(2)
Lock lever for (B) “Lock”
attachment control
OPENING
AND
CLOSING
OF
PARTS
Opening / Closing the
Rear
Bonnet
CAUTION
To avoid personal injury:
Do not touch the exhaust
muffler or the exhaust pipe;
serious burns can occur.
1.
Put the starter key in the key slot and
turn it clockwise to the vertical position.
The rear bonnet will be unlocked. Press
the button, and the rear bonnet can be
opened sideways.
When the rear bonnet is opened, the rear
bonnet will be locked with the lock lever.
To Next Page