ACK! E-04 ELT User Manual

MODEL E-04 121.5/406 MHz ELT
PROGRAMING MANUAL
REVISION 1.2 December 4th 2017
WARNING: Once an ELT is programmed from the default Serial
Number format, it can not be programmed back to Serial Number for-
mat except by the factory.

ACK! E-04 ELT Specifications

General

GPS	Yes
Frequency	406 MHz
Battery Life	5 years
Weight	0.5 kg
Power Output	5 W
Activation	Automatic or Manual

Summary

Minimum System Requirements

Installation Procedures

Install Brother QL-700 Printer

Steps to install the Brother QL-700 printer and load label tape.

Software Installation

Instructions for installing the E-04 ELT Programmer software on Windows.

Programming ELT's

Programming Protocol Selection Options

Standard Location Serial Number Protocol

Select this protocol for programming using the ELT's serial number and country code.

Standard Location Operator, Designator & Serial Number Protocol

Select this protocol to program with operator designator and serial number.

Standard Location 24-Bit Address Protocol

Select this protocol for programming using the aircraft's 24-bit ICAO address.

Programming Protocol Procedures

Serial Number Protocol Programming Steps

Detailed steps for programming the ELT using the serial number.

Operator, Designator & Serial Number Protocol Programming Steps

Detailed steps for programming with operator designator and serial number.

24-Bit Address Protocol Programming Steps

Detailed steps for programming the ELT using the 24-bit ICAO address.

Locating the IACO 24-Bit Address