Aclas Pty Ltd Add: 72 Meadow Ave., Coopers Plains, QLD 4108 Tel: (07) 3277 8989 Fax: (07) 3277 8080
www.aclas.com.au
2．
．．
．OPERATOR LOGIN/LOGOUT SYSTEM
To login, input clerk code then press then password, if activated.
When you print the daily report in Z mode, the clerk will be logged out automatically.
Attention:
Any sales operation will cause an error when no clerk is logged in. The cash register will
beep continuously when error occurs. Press key to stop.
CLERK 1 is the manager and has access to all the functions.
3. BASIC SETTING
3.1 SET TIME AND DATE
From the main screen, press the key. Scroll down using the key, until you get to
DATE AND TIME SET function, and press . Scroll down to select either Date or Time and
press
3.2 SET HEAD & TAIL MESSAGE
Press the key. Scroll down using the key, until you get to SET HEAD MESSAGE
function, press . <HEAD MSG INDEX (1-5)>, INDEX (1-5) represents the line that you
want to modify. After setting the Message, press to confirm. Setting the TAIL Message is
the same as HEAD message, just scroll down to SET TAIL MESSAGE.
3.3 SET PLU
Press twice and then press
3.3.1 System Prompts <BARCODE>:
Input product code using the key board or scan the barcode (less than 13 digits),
then press
3.3.2 System Prompts <NAME>:
Input PLU name and press
Time (HHMMSS)
Set the time here
Eg: 134555
Means 13:45:55pm
<HEAD MSG IDE
(1-5)>
Input the line
number you want
to modify.
<HEAD MSG>
Write the message
you want to display
on this line.
To Next Page
Loading...