What to do if music is not playing on ACME Headphone?
If music is not playing on your ACME Headphone, ensure that both devices are paired and connected. Also, verify that “Media playback” is enabled in your Bluetooth settings. If the issue persists, try pairing the devices again.
What to do if the charging case indicator has no light while charging ACME BH410 Headphone?
If the charging case indicator has no light while charging your ACME Headphone, the DC power supply might not be outputting power. Check your USB connections and try charging with a different charger.
What to do if the earphone indicator has no light while charging ACME BH410 Headphone?
If the earphone indicator has no light while charging your ACME Headphone, check the pogo pin charging points and ensure the earphone is correctly placed in the charging case.
What to do if ACME Headphone pairing was successful but the device cannot find the right earphone or reconnect/connect?
If your ACME Headphone pairing was successful but the device cannot find the right earphone or reconnect/connect, it might be due to several reasons. First, too many pairing records can cause issues; try deleting old pairing records and attempt the pairing process again. Also, the earphones might be paired with another nearby device. Disconnect or turn off the Bluetooth function of other devices. Finally, you can reset your earphones. To do this, take them out of the charging box. When both earphones are on, press and hold the power (multifunction) button of one earphone for 3 seconds to power off both earphones until the red indicator light flashes 3 times. Then, press and hold the power button of both earphones for 7 seconds until a sound prompt is heard. Turn on the earphones and wait a...
To Next Page
General
