ACME Oxygen - Page 18

- 17 -
White Balance
Color Calibration
Calibration Mode
Pri/Sec Mode
Select Pri/Sec Mode, press ENTER.
Use UP/DOWN button to select Secondary or Primary, confirm your
selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select Calibration Mode, press ENTER.
Use UP/DOWN button to select High CRI or High Output, confirm your
selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select Color Calibration, press ENTER.
Use UP/DOWN button to select Off or On, confirm your selection with
ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select White Balance, press ENTER.
Use UP/DOWN button to select Red, Green, Blue, Red 1, Green 1, Blue
1 …… or Red 7, Green 7, Blue 7, confirm your selection with ENTER.
Use UP/DOWN button to select a value between 125 and 255, confirm
your selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.