- 19 -
Manual Test
Show Program
Enter the control menu and select Show Program, press ENTER. Use the UP/DOWN button
to select Set Scene Totals, Edit Scene Color, Fade Time, Hold Time, Pan POS, Tilt POS or Zoom
POS.
Set Scene Totals
Edit Scene Color
Select Edit Scene Color, press ENTER.
Use UP/DOWN button to select a value between 1 and 50, confirm your
selection with ENTER.
Use UP/DOWN button to select Red, Green, Blue or White, confirm your
selection with ENTER.
Use UP/DOWN button to select a value between 0 and 255, confirm
your selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select Set Scene Totals, press ENTER.
Use UP/DOWN button to select a value between 0 and 50, confirm your
selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select Manual Test, press ENTER.
Use UP/DOWN button to select the channel for which the manual test
is to be performed, confirm your selection with ENTER.
Use UP/DOWN button to select a value, confirm your selection with
ENTER.
To exit the menu, press MENU, or wait 30 seconds.
(The device returns to its original DMX state after the manual test. The
test values are saved automatically when the device is switched off.)
To Next Page
Loading...
