- 21 -
Information
Enter the control menu and select Information, press ENTER. Use the UP/DOWN button to
select Fixture Use Hour, LED Use Hour, Temperature, Fan State, Upgrade File, Firmware
Version, RDM UID or Error Logs.
Fixture Use Hour
LED Use Hour
Temperature
Fan State
Select Fan State, press ENTER.
The fan status is displayed.
To exit the menu, press MENU, or wait 30 seconds.
Select Temperature, press ENTER.
The device temperature is displayed.
To exit the menu, press MENU, or wait 30 seconds.
Select LED Use Hour, press ENTER.
Use UP/DOWN button to select Total LED Hour (total time) or LED On
Hour (current switch-on time), confirm your selection with ENTER.
The total time or current switch-on time is displayed.
Use UP/DOWN button to select LED Hours Reset, confirm your
selection with ENTER.
If you wish to reset the LED operating hours, select Yes. If you do not
wish to reset anything, select No. Confirm your selection with ENTER.
If you select Yes, use UP/DOWN button to set the password 050,
confirm your selection with ENTER. The LED operating hours is reset.
To exit the menu, press MENU, or wait 30 seconds.
Select Fixture Use Hour, press ENTER.
The operating hours is displayed.
To exit the menu, press MENU, or wait 30 seconds.
To Next Page
Loading...
