ACME Oxygen - Page 24

- 23 -
Reset Functions
Enter the control menu and select Reset Functions, press ENTER. Use the UP/DOWN button
to select Pan/Tilt Reset, Effect Reset or All Reset.
Pan/Tilt Reset
Effect Reset
All Reset
Factory Restore
Select Effect Reset, press ENTER.
Use UP/DOWN button to select No or Yes (the device will run built-in
program to reset effect to their home positions), confirm your selection
with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select Pan/Tilt Reset, press ENTER.
Use UP/DOWN button to select No or Yes (the device will run built-in
program to reset pan/tilt to their home positions), confirm your selection
with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select All Reset, press ENTER.
Use UP/DOWN button to select No or Yes (the device will run built-in
program to reset all to their home positions), confirm your selection with
ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select Factory Restore, press ENTER.
If you wish to reset the device to the factory settings, select Yes. If you
do not wish to reset anything, select No. Confirm your selection with
ENTER.
To exit the menu, press MENU, or wait 30 seconds.