44
10.2.3 Remove the drawer, flip the machine over so the
bottom is facing up, and use a lint-free cloth to wipe the
dirt o the guide rail on X-axis.
10.2.4 Squeeze out a small amount of lubricant and apply
it to the guide rail. Flip the machine back over so the top is
facing up, and manually move the X-axis to distribute the
lubricant evenly along the rail.
10.3 Machine Body Maintenance and Cleaning
10.3.1 Turn o the power to the machine. Then, use the
yellow bristle brush to sweep the dust and dirt on the
machine body into the drawer.
To Next Page
Loading...
