- 44 -
Power Manager
Select “Power Mng”, press [OK], the following appears:
Shutdown: Set a time the terminal will automatically turn off.
The terminal can be turned on again with the power button.
Select Shutdown, press [OK], the following appears:
Press [OK] and enter the time the unit will shut off.
After setting the shutdown time, press [ESC] and then [OK]
to save the settings.
PowerOn: Set a time the terminal will automatically turn on.
Power Mng ▼
►Shutdown N
PowerOn N
Sleep N
----------------------------
Idle SLP
Idle Min 0
Bell Delay 10
Scheduled Bell
Lock Power N
Shutdown
Set Sch. Fun?
ESC OK
To Next Page
Loading...