Why does my Acson international ADB350B3 Blower compressor operate continuously?
If your Acson international Blower's compressor runs non-stop, it could be due to a dirty air filter. Try cleaning it. Alternatively, the temperature setting might be too low during cooling, so try increasing it. Or, if it's heating, the temperature might be too high, so try lowering it.
What to do if there is condensation on the front air grille of my Acson international Blower?
If you find condensation on the front air grille of your Acson international Blower, it's likely due to air humidity or a temperature setting that's too low after the unit has been running for a while. To resolve this, increase the temperature setting and set the unit to operate at a high fan speed.
How to resume Acson international ADB350B3 after a power failure?
If your Acson international Blower doesn't restart after a power failure, turn on the unit using the wireless or wired controller.
Why is the airflow too slow in my Acson international ADB350B3 Blower?
If your Acson international Blower's airflow is too slow, or the room isn't cooling enough, several factors could be at play. The air filter might be dirty, or doors and windows might be open. Also, the air suction and discharge of both indoor and outdoor units may be clogged or blocked. Lastly, the temperature setting might not be low enough.
General| Model | ADB350B3 |
|---|---|
| Air Flow | 350 m3/h |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Noise Level | 45 dB |
To Next Page