G12 REMOTE CONTROLLER
ON/OFF Logo
• Green colour for cooling model.
• Orange colour for Heatpump model
Personalised Setting
• Press and hold the button for 3s to
initial personalized setting.
• Set the individual setting e.g
MODE, SET TEMP or FAN SPEED
and leave for 4s to save
• 2 groups of settings are allowed to
stored in the handset.
OFF Timer Setting
• Press the SET button will activate
the off timer function.
• Set the desired off time by pressing
the SET button continuosly.
• Press the CLR button to cancel the
off timer setting
Clock Time Setting
• Press button + or - to increase or
descrease the clock time.
Sleep Mode
• Press the button to activate sleep
mode. This function is available
under COOL, HEAT & AUTO mode
• When it is activated in COOL mode,
the set temperature will be increased
0.5°C after 30 mins, 1°C after 1 hour
and 2°C after 2 hours.
• When it is activated in HEAT mode,
the set temperature will be
decreased 1°C after 30mins, 2°C
after 1 hour and 3°C after 2 hours.
Operating Mode
• Press the MODE button to select the
type of operating mode.
• For cooling only unit, the available
modes are : COOL, DRY & FAN
• For Heatpump unit, the available
modes are : AUTO, COOL, DRY,
FAN & HEAT.
Temperature Setting
• To set the desired room temperature,
press the button to increase or decrease
the set temperature.
• The temperature setting range is from
16°C to 30°C.
• Press both buttons simultaneously to
toggle the temperature setting between
°C to °F
On/ Off Button
• Press once to start the air conditioner
• Press again to stop the unit
ON Timer Setting
• Press the SET button will activate the on
timer function.
• Set the desired on time by pressing the
SET button continuously.
• Press the CLR button to cancel the off
timer setting.
Fan Speed Selection
• Press the button until the desired fan
speed is achieved.
Automatic Air Swing
• Press the SWING button to activate the
automatic air swing function.
• To distribute the air to a specific direction,
press the SWING button and wait until
the louver move to the desired direction
and press the button once again.
85
To Next Page
