ACT ACTpro MIFARE Series User Manual

ACTpro MIFARE Readers Installation Manual
Copyright © 2016 Access Control Technology Ltd. Part No.18-00102 Issue 1
12
1
2
3
+12/24V
DATA
CLOCK
SENSE
0V
RED L
GREEN L
BUZZ
ON LED OFF
{
Sector Mode
{
Serial Mode
Jumper Pins 1 + 2:
Sector operation
Jumper Pins 2 + 3:
Serial operation
No Jumper:
Byte reversed serial operation
ACTpro 1030PM MIFARE Panel Mount
reader connections to the ACTpro
Door Controllers & Door Stations
LED Control
The standby LED on the front of the reader can be congured using the link
wire. When the link wire is connected between LED and OFF, the blue LED
on the front of the reader will remain off while in standby. It will turn green on
access granted and red on access denied
When the link wire is connected between LED and ON, the blue LED on the
front of the reader will remain on while in standby. It will turn green on access
granted and red on access denied.
White SENSE
Green CLOCK & DATA 1
Blue DATA / DATA 0
Red +12V
Black 0V
Brown RED LED
Yellow GREEN LED
ORANGE (BUZZER Ctrl)
Wiring for Clock & Data /
Wiegand Reader
The standard wiring colours for ACTpro
MIFARE readers are shown across.
Readers should be a maximum of 100m
when powered from +12V.

ACT ACTpro MIFARE Series Specifications

General

Brand	ACT
Model	ACTpro MIFARE Series
Category	Security System
Language	English