ACT ACTsmart2 Series Operating And Installation Instructions

ACTsmart2 Operating and Installation Manual Rev. 1.3
22
Step Present Operation
1 Programming Card
2 Programming Card
3 Programming Card
4 Programming Card
5 Programming Card Buzzer sounds intermittently and the LED flashes
6 Programming Card Input 1 = Door Contact, AUX I/O 1 = Door Alarm,
AUX I/O 2 = SmartLock. See the SmartLock Connections
diagram.
Programming for SmartLock:
Step Present Operation
1 Programming Card
2 Programming Card
3 Programming Card
4 Programming Card
5 Programming Card Buzzer sounds intermittently and the LED flashes RED to warn
you are about to default the system
Present Card Default ACTsmart2s. Note: This deletes the Programming Card.
(Not Programming Card)
Default ACTsmart2:
Step Present Operation
1 Programming Card
2 Programming Card
3 Programming Card
4 Programming Card Wait for 4 seconds, Buzzer sounds indicating timing... wait
required period.
5 Programming Card Buzzer stops - timer set.
Programming the Door Relay Time:
ACTsmart2 Mar/Apr 08:ACTsmart2 Mar 08 29/04/2008 17:03 Page 22

ACT ACTsmart2 Series Specifications

General

Brand	ACT
Model	ACTsmart2 Series
Category	Controller
Language	English