Need help?Do you have a question about the ACT ACTsmart2 1070 and is the answer not in the manual?
General| Max. number of doors | 2 |
|---|---|
| Max. number of readers | 4 |
| Number of relays | 2 |
| Number of inputs | 4 |
| Operating voltage | 12V DC |
| Input Voltage | 12V DC |
| Output Current | 1 A |
| Number of Outputs | 2 |
| Protection Class | IP20 |
| Communication | RS485 |
| Operating Temperature | -10°C to +50°C |
Provides essential notes and precautions for installing the ACTsmart2 unit.
Highlights critical safety considerations for access control system usage.
Step-by-step guide for quick programming of the ACTsmart2 Prox Only unit.
Quick programming steps for the ACTsmart2 Pin & Prox unit.
Rapid programming instructions for the ACTsmart2 PIN Only unit.
General overview of how the ACTsmart2 system operates.
Detailed steps for adding and deleting users (cards, PINs).
Configuration for door relay times, ajar times, and PIN digit length.
Programming for toggle mode and user arming functions.
Configuration for programmable inputs and auxiliary I/O functions.
Procedures for adding users for a second door.
Steps for setting up, assigning doors, and maintaining network units.
Procedure for resetting the ACTsmart2 unit to factory default settings.
To Next Page
