Need help?Do you have a question about the ACT ACTsmart2 1080 and is the answer not in the manual?
General| Number of Doors | 2 |
|---|---|
| Communication | TCP/IP, RS485 |
| Input Voltage | 12V DC |
| Output Voltage | 12V DC |
| Maximum Current | 1A |
| Power Consumption | 5W |
| Storage Temperature | -20°C to +70°C |
| Protection Class | IP20 |
| Product Type | Controller |
| Event Buffer | 100, 000 |
| Inputs | 4 |
| Outputs | 4 |
| Operating Temperature | -10°C to +50°C |
Quick guide for programming the ACTsmart2 Prox Only (1070) model.
Quick guide for programming the ACTsmart2 Pin & Prox Only (1080) model.
Quick guide for programming the ACTsmart2 Pin Only (1090) model.
Assigning unique numbers to doors for network configuration.
Designating a master unit for network programming.
Process to assign door numbers to ACTsmart2 units.
Granting user access to specific doors on the network.
Verifying network configuration and door number assignments.
Adding multiple cards in a batch for the Prox Only model.
Removing multiple cards from the network.
Deleting a single card using a subsequent card.
Setting default Input/Output configurations.
Information on obtaining technical assistance for ACT products.
Information on purchasing ACT products through distributors.
To Next Page
