ACTi ACM-3011 Installation

www.acti.com
ACTi
Knowledge Base
Category: Installation & Configuration Note
Sub-category: Application
Model: ACM-3511/ACM-3011
Firmware: N/A
Software: N/A
Author: Victor.Wang
Published: 2009/09/02
Reviewed: 2010/01/21
1
Tips for 3-Inch Dome Installation
Contents
Introduction
Installation of camera plate
Installation of camera
Installation of front cover
Future design and improvement
Introduction
Some customers have a problem with installing a 3 inches dome. After adjusting the viewing
angle, zoom or focus, the lens part will be moved again by the rubber and black plastic cover
when they closing the dome cover. The purpose of this document is to guide customer through
the procedures of installing a 3 inches dome efficiently.
Installation of camera plate
1. Use the drill template, and drill a hole with φ 35 on the ceiling.

ACTi ACM-3011 Specifications

General

Form Factor	Dome
Connectivity Technology	Wired
Sensor Type	CMOS
Resolution	640x480
Aperture	F2.0
Field of View	53.4°
Day/Night Functionality	Yes
Day/Night	Yes
Category	Security Camera
Lens Type	Fixed
Minimum Illumination	0.5 Lux @ F2.0
Compression Format	H.264, MJPEG
Video Compression	H.264, MJPEG
Power Supply	PoE (IEEE 802.3af), 12V DC
Network Interface	Ethernet 10Base-T/100Base-TX
Operating Temperature	0 °C ~ 50 °C (32 °F ~ 122 °F)