Need help?Do you have a question about the ACTi ACM-4000 and is the answer not in the manual?
All names used in this manual for hardware and software are probably registered trademarks of respective companies.
Every care has been taken during writing this manual. Please inform your local office if you find any inaccuracies or omissions.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
Lists the items included in the ACM-4000 camera package, such as the camera, power adapter, CD, and warranty card.
Details the camera's cutting-edge video transmission, dual streaming, time code, DDNS, motion detection, and bundled software.
Provides critical safety guidelines for using the device, including power, opening the housing, cleaning, attachments, water, and servicing.
Details the physical components of the ACM-4000 camera, including the Action LED Indicator and Microphone Input.
Guides on connecting the IP device to power, Ethernet hub, and a PC, including notes on PoE.
Provides detailed technical specifications for the ACM-4000 camera, covering image, lens, functions, video, audio, network, and physical aspects.
General| Sensor | 1/3" Progressive Scan CMOS |
|---|---|
| Day/Night | Yes |
| WDR | No |
| Compression | H.264, MJPEG |
| Network Interface | 10/100 Mbps Ethernet |
| Ingress Protection | IP66 |
| Sensor Size | 1/3" |
| Image Sensor | CMOS |
| Lens | 2.8mm fixed |
| Minimum Illumination | 0.5 Lux at F2.0 |
| Frame Rate | 30 fps |
| Power | 12V DC |
| Power Supply | 12V DC / PoE |
| Operating Temperature | -10°C to 50°C |
| Mount Type | Wall, Ceiling |
To Next Page
