Need help?Do you have a question about the ACTi KCM-5211 and is the answer not in the manual?
Warnings on power supply, housing, cleaning, attachments, and environmental hazards.
Procedures for damage requiring service and post-repair safety checks.
Instructions for connecting the camera using PoE or a power adapter.
How to access the camera when using a DHCP server for IP assignment.
General| Resolution | 2MP |
|---|---|
| Video Compression | H.264, MJPEG |
| Operating Temperature | -10°C to 50°C |
| Environment | Indoor |
| Sensor Size | 1/2.8" |
| Day/Night | Yes |
| IR Cut Filter | Yes |
| Wide Dynamic Range | Yes |
| WDR Technology | Digital WDR |
| Frame Rate | 30 fps |
| Sensor Type | CMOS |
| Ingress Protection | IP66 |
| Camera Type | Box |
| Network Interface | 10/100 Mbps Ethernet |
| Power Supply | 12V DC |
| Audio | 2-way |
| Local Storage | MicroSD card |
| Minimum Illumination | 0.01 Lux |
To Next Page
