ACTi ACM-4201 Specifications

www.acti.com
* Latest product information: www.acti.com/product/
* Accessory information: www.acti.com/accessory/
110809
PHOTO INDICATION
Cube Camera
ACM-4201
Megapixel IP PoE
Cube Camera with PIR
• 1/3” Aptina Progressive Scan CMOS
• Minimum illumination 0.5 Lux at F1.0
• Bundled with f4.2 mm / F1.8 Megapixel  xed lens
• 8 fps at 1280 x 1024 resolution
• Selectable MPEG-4 SP, MJPEG compressions
• Two-way audio
• Video motion detection
• Digital input and digital output
• Built-in passive IR sensor
• Powered by PoE Class 3 / DC 12V
ACCESSORY OPTIONS
DIMENSION DIAGRAM
Lens
PLEN-0201 Manual Iris, F1.2, 2.4 mm - 6 mm, 113.4° - 46°
PLEN-0202 IR Compatible, Manual Iris, F1.6, 2.8 mm - 12 mm, 94° - 25.5°
Unit: mm [inch]
1 Power LED
2 Built-in Microphone
3 PIR Sensor
4 Audio Output
5 Ethernet Port
6 DC 12V Power Input
7 Digital Input / Output
8 Reset Button
65
1
2
4 73
8
* The bracket is included.

ACTi ACM-4201 Specifications

General

Maximum resolution	1280 x 1024 pixels
Camera shutter speed	1/5 - 1/15000 s
Minimum illumination	0.5 lx
Sensor type	CMOS
Optical sensor size	1/3 \
Focal length range	4.2 mm
Video motion detection	Yes
Sample rate	8 kHz
Signal-to-Noise Ratio (SNR)	58 dB
Supported network protocols	TCP, UDP, IP, HTTP, DHCP, PPPoE, RTP, RTSP, FTP, SMTP, DNS, DDNS, NTP, ICMP, IGMP, ARP
Power source type	PoE
Power consumption (typical)	2.88 W
Ethernet LAN (RJ-45) ports	1
Dimensions (WxDxH)	88 x 39 x 85 mm
Power requirements	DC 12V
F-number (relative aperture)	1.8
Operating temperature (T-T)	0 - 40 °C
Certification	CE, FCC

Weight and Dimensions

Weight	150 g